Kitchen Worktops Direct
Solid Surface Worktop Repair & Repolish
Factory-direct worktops with expert templating across the UK.
Solid Surface · Kitchen Worktops Direct
Repolishing and repairs for Corian, HI-MACS, Staron and other solid surface worktops and sinks
Dull, scratched, chipped or cracked worktops can usually be brought back without replacing them. Tell us what you can see, send a few photos, and we will reply with a no-obligation quote.
Three separate services
Repolishing, chip and scratch repair, or crack repair?
Worktop repolishing
For worktops that have gone dull, patchy or covered in fine everyday scratches. We sand and polish the whole surface back to an even finish. A standard repolish eliminates most scratches.
Standard solid surface repolish: £350 + VAT
Chip and deep scratch repair
For chips on edges and around sinks, and scratches too deep for a polish alone. The damaged area is filled, cured, levelled and blended into the surrounding surface.
Quoted from your photos
Crack repair
For cracks across a run, at a joint or near a cut-out. We first find out why it cracked, because the cause has to be put right before the repair can last.
Quoted after assessment
Prices
Worktop repair and repolish prices
| Service | Price |
|---|---|
| Standard solid surface repolish (removes most scratches) | £350 + VAT |
| Chips, deep scratches and severe damage | Quoted from photos, or assessed on site if photos are not enough |
| Crack repair | Quoted after assessment (cause must be resolved first) |
| Quartz worktops | Depends on the severity of the damage |
| Out-of-hours work at live commercial premises | +£100 + VAT |
Repolishing and repairs are separate services. £350 + VAT is the standard repolish price, not a fixed price for every repair.
How it works
From photos to a finished worktop
- Tell us the condition
Tick what applies, describe the damage and the material, brand and colour if you know it. - Upload photos and videos
A whole-worktop photo plus close-ups with a coin beside the damage for scale. - We assess
A specialist reviews your photos. If they are not enough, an installer can inspect on site. - No-obligation quote
You receive a clear price for repolishing and any separate repairs. - Book a date
We confirm access, parking and power, and out-of-hours work for live commercial sites. - Repair and polish
Our installer carries out the work and leaves you care advice to keep the finish looking its best.
Cracked worktops
Why worktops crack, and what has to happen first
Cracks rarely appear on their own. The most common causes are:
- Uneven or moving base cabinets
- Excessive weight on a joint
- A poorly made joint
- Subsidence or movement in the building
The underlying cause must be resolved before a crack is repaired. If it is not, we cannot guarantee a successful repair. An exact shade match also cannot be guaranteed, because solid surface adhesives are colour-batch coded. One of our installers can inspect the worktop on site, and the quote is free and no-obligation.
Photo guide
What photos and videos to send
Repolish enquiries
- One photo of the whole worktop
- Close-ups of scratches or dull areas with a coin for scale
- A short video moving across the surface in daylight
Chips and deep scratches
- A photo showing where the chip is on the worktop
- Close-ups from above and from the side with a coin
- The worktop colour name if you know it
Crack enquiries
- A photo of the whole kitchen
- Close-ups of the crack with a coin for scale
- What is underneath the crack (dishwasher, oven, cabinet)
- Whether the crack runs through a joint, plus a short video
Request a repair or repolish quote
The more detail and photos you send, the more accurate the quote. Fields marked * are required.
FAQs
Worktop repair and repolishing questions
How much does it cost to repolish solid surface worktops?
A standard repolish of solid surface worktops is £350 + VAT. It removes most everyday scratches and brings back an even finish. Heavier damage, chips and cracks are priced separately once we have seen photos or inspected the worktop.
Is £350 + VAT the price for every repair?
No. £350 + VAT is for a standard solid surface repolish. Chip repairs, crack repairs, severe damage and quartz work are separate services and are quoted after assessment.
Can you repair quartz worktops?
Often, yes. Quartz repairs depend on how severe the chip or damage is, so we price them individually after seeing clear photos or inspecting the worktop.
Can a cracked worktop be repaired?
Many cracks can be repaired, but the cause must be fixed first. Cracks are usually caused by uneven cabinets, too much weight on a joint, a poor joint or subsidence. If the cause is not resolved, the crack can return and a successful repair cannot be guaranteed.
Will the repair match my worktop colour exactly?
We get as close as possible, but an exact shade match cannot be guaranteed. Solid surface adhesives are colour-batch coded, so a repair can look very slightly different from the original sheet.
Do you work out of hours at commercial premises?
Yes. Out-of-hours work at live commercial premises, such as restaurants, cafés, offices and shops, is an extra £100 + VAT.
What photos should I send?
For a repolish, send one photo of the whole worktop and close-ups of the damage with a coin beside it for scale. For a crack, also send a photo of the whole kitchen, a close-up of the crack with a coin, what sits underneath the crack, and tell us whether it runs through a joint. Short videos help too. This applies to Corian, HI-MACS, Staron and other solid surface worktops.
Do you need to visit before quoting?
Not usually. Clear photos and videos are normally enough. If they are not, or the damage is severe, one of our installers can inspect the worktop on site before we confirm a price.
Replacing rather than repairing?
If a worktop is beyond repair, or you are planning a new kitchen, we can supply and fit a replacement.